Description Envirosafe SF – Food Safe Multi Surface Cleaner & Sanitiser Window Stickers, free with any purchase of Envirosafe – add a note at checkout to request one. A multi-surface cleaner and sanitiser specially formulated to be safe for use in food preparation areas. Will safely clean and protect by removing harmful bacteria, viruses and odours. Suitable for all wet cleanable surfaces and fabrics. Can be used to refill our Multi Surface Cleaner & Sanitisers. READY TO USE – REDUCES THE RISK OF CONTAMINATION OR OVER-APPLICATION BIODEGRADABLE ALCOHOL AND BLEACH FREE FRAGRANCE FREE NON-FLAMMABLE NEUTRAL PH SUITABLE FOR BIO-HAZARD CONTROL FOGGING PASSED & APPROVED TO EUROPEAN STANDARDS ANTI-BACTERIAL EN1276 LOG KILL 6 = 99.9999% ANTI-VIRAL EN14476 LOG KILL 4.33 = 99.99% ANTI-FUNGAL EN1650 LOG KILL 6 = 99.9999% April 2020 EN14476 Virucidal Test Results: SUITABLE FOR USE IN HOMES • DOCTORS’ SURGERIES • CARE HOMES • SCHOOLS • OFFICE BUILDINGS • ANY ENVIRONMENT REQUIRING MICROBIAL CONTROL FAST ACTING – KILLS BACTERIA AND VIRUSES WITHIN SECONDS However, allowing to dwell, especially on fabrics & fibres ensures product is absorbed and fully effective (do not over-wet.) LONG LASTING RESIDUAL EFFICACY BUT WITH REAL WORLD ADVICE The antimicrobial effects of Envirosafe can last weeks, however, in high-use areas where the surfaces are rubbed against and contamination is re-introduced, we advise a more realistic period of 24 hours. FOOD SAFETY Standard Envirosafe is not food safe – our NEW Envirosafe SF is! Ready to use, fragrance free and safe for use in food prep areas, however, (some real world advice) European regulations are extremely strict on the levels of disinfectant residue that can come into contact with food, which can easily be exceeded if too much product is applied or re-applied without rinsing in between applications – therefore, we advise that surfaces which will come into direct contact with food are wiped with wet, disposable paper towels prior to food being prepared. (Interestingly, in the USA a level of 200ppm is safe according to their regulations, but even though we are Brexiting, the UK will still be following European regulations for the foreseeable future!) INSTRUCTIONS FOR USE: Ready to use: Hard Surface Cleaning & Sanitising: Clean surface and ensure free from dirt & debris. Spray onto surface and allow to dry. Can be wiped over with a disposable cloth/paper towel. Suitable for all wet-cleanable surfaces. May be misted over for added protection. After application of Envirosafe SF where food is to be prepared, wipe surface with a wet paper towel before direct food contact. Fogging: Mix as directed above and follow machine instructions. Can be applied with an 01 jet using your existing spraying equipment. Check moisture has formed on surfaces to ensure adequate coverage. Use QAC Test Strips to check adequate application. Use with our QAC Test Strips for effective measuring of product application: ensure test strip tip has absorbed applied product and take reading immediately – 200ppm is an effective level of sanitiser. Not suitable for use in Hydro-Force inline sprayers or equipment that heats the product. QUALITY, PERFORMANCE AND HONESTY Download the MSDS: Envirosafe SF Covid-19 is an illness caused by SARS-CoV-2, which is a Coronavirus. Coronaviruses have been around for a long time and belong to a group known as ‘enveloped viruses’. You can destroy the Coronavirus in the environment, but you cannot cure the illness once inside the human body. All of our anti-viral products contain our active ingredient which has been laboratory tested and proven effective against Coronavirus SARS-COV-2. There is some science behind how QAT based products such as ours combat enveloped viruses, we have made an easy-to-read leaflet about this, you can download a copy here.
